50 years in metallurgy · IATF 16949:2016 · NABL ISO/IEC 17025:2017 lab · Japanese collaboration
Pioneer TUFF, No.1 brand in fasteners Enquire now →

TUFF® · Structural bolting

DTI Washer (Direct Tension Indicator)

EN 14399-9 · ASTM F959 · BS EN 14399-9 · BS 7644

A DTI Washer (Direct Tension Indicator) is a hardened washer with small protrusions (bumps) on one face. When a bolt is tightened, the protrusions progressively collapse as bolt tension increases.

TUFF makes DTI washers in M12 – M36, to EN 14399-9, ASTM F959, BS EN 14399-9, BS 7644. Other sizes, grades and finishes to drawing.

TUFF DTI washers (direct tension indicators) with protrusions, marked TUFF
TUFF® DTI washers, actual product

Key facts

Sizes
M12 – M36
Main standards
EN 14399-9, ASTM F959, BS EN 14399-9, BS 7644
Finishes
Hot Dip Galvanised, Black Phosphate, Electro Galvanised, PTFE Coating
Made by
Pioneer Nuts & Bolts Pvt. Ltd. (TUFF®), India

DTI Washer specification

Specification

ParameterDTI Washer
Standards

EN 14399-9 · ASTM F959

Sizes we make
  • M12 – M36
Compatible Bolts

High-strength structural bolts: IS 3757 (Property Class 8.8S, 10.9S) · EN 14399-3 (System HR) · ASTM F3125 (Gr. A325 / A490)

Indication Method

Feeler gauge measurement of residual gap between DTI protrusion face and mating surface at specified minimum bolt preload

Dimensional Standards

British / EuropeanBS EN 14399-9: Direct tension indicators for structural bolting assemblies · BS 7644: Direct tension indicators (the original British standard for DTI washers)

AmericanASTM F959: Compressible washer type direct tension indicators for use with structural fasteners

Material

Carbon or alloy steel, through-hardened where heat treated; compression load and gap per ASTM F959 / BS EN 14399-9

Surface Finish

Hot Dip GalvanisedIS 1367 Pt.13 · IS 4759 · BS EN 1461 · ASTM A153 · ASTM A123

Black PhosphateIS 1367 Pt.12

Electro GalvanisedIS 1367 Pt.11 · IS 1573

PTFE CoatingPTFE / fluoropolymer, to purchaser specification

Specification as offered by TUFF. Ranges, grades and finishes outside this table are made to drawing. Send your requirement to sales@tuffbolt.com.

Standards for dti washer

ISO International Standards

  • ISO 16047: Torque/clamp force testing (reference for bolt tension verification method)

British / European Standards

  • BS EN 14399-9: Direct tension indicators for use in structural bolting assemblies (the primary current standard for DTI washers in Europe)
  • BS 7644: Direct tension indicators (original British standard for DTI washers, the basis for EN 14399-9)
  • BS EN 14399-1: General requirements for high-strength structural bolting assemblies (system reference)

American Standards (ASME / ASTM)

  • ASTM F959: Compressible washer-type direct tension indicators for use with structural fasteners (the primary ASTM standard for DTI washers)
  • ASTM F3125: High-strength structural bolts for structural steel joints (bolt standard used with DTI washers)
  • ASTM F3125 Gr. A490: High-strength alloy steel bolts for structural steel joints
  • ASTM A153: Hot dip galvanised coatings on iron and steel hardware

Critical applications

  • Bridge girder splices: proof of HSFG preload by feeler gauge on site
  • Crane runway girders and gantries: preloaded joints under fatigue loading
  • Third-party inspected structures (railway, NHAI, metro) where preload must be documented

Typical uses of this product type. Project references on request.

DTI Washer: questions

How does a DTI Washer work?

A DTI Washer has small protrusions on one face. When installed under a bolt head or nut and tightened, the protrusions progressively compress as bolt tension increases. At the specified minimum bolt preload, the gap between the DTI face and the mating surface reduces to the prescribed maximum value (RCSC / ASTM F959 practice: 0.015 in / 0.38 mm feeler gauge for uncoated and 0.005 in / 0.13 mm for coated DTIs, the gauge depends on the standard, coating and installation position, not on bolt size), confirmed by a feeler gauge. Minimum preload is verified when the feeler gauge is refused in the number of gaps the standard requires (RCSC 2014: at least half of the spaces; RCSC 2020: more than half).

What is the difference between BS EN 14399-9 and ASTM F959?

Both standards cover compressible washer-type DTI indicators for structural bolting. BS EN 14399-9 is the European standard, used with System HR and System HV bolt assemblies per EN 14399. ASTM F959 is the American standard, used with ASTM A325 / A490 / F3125 structural bolt assemblies. The protrusion geometry, gap requirements, and hardness specifications differ between the two standards.

Under which face is the DTI Washer installed, bolt head or nut side?

Per BS EN 14399-9 and ASTM F959, the DTI washer may be installed under the bolt head or under the nut, depending on which side is rotated during tightening. Normally the DTI is installed under the non-turned element (usually the bolt head) with the protrusions bearing against it; if it must be placed at the turned element, a hardened washer is fitted between the turned element and the DTI. The project structural specification should define the installation position.

Can DTI Washers be reused?

No. DTI Washers are single-use only. Once the protrusions are compressed to verify preload, the DTI has fulfilled its function and cannot be reset. If a bolt is subsequently loosened and re-tightened, a new DTI Washer must be installed.

About the maker

  • Fasteners since 1996Pioneer Nuts & Bolts Pvt. Ltd., brand TUFF®. Forging, heat treatment, machining and finishing in-house.
  • 50 yearsMetallurgy and heat treatment, since 1976.
  • IATF 16949:2016Certified quality management system.
  • NABL labIn-house laboratory accredited by NABL to ISO/IEC 17025:2017 for the tests in its scope. Lots tested to the applicable standard.
  • Japanese collaborationTechnical collaboration with Japanese fastener companies.
  • 150+ testimonialsMore than 150 customer testimonials.

Enquire now

Send an enquiry

Fill in the form, or mail your requirements to sales@tuffbolt.com.

I am writing about
* Required. Goes to sales@tuffbolt.com.Used only to answer you. Privacy policy